Applied-motion STAC6-C Instrukcja Użytkownika Pobierz pdf (Strona 52)

STAC6 Hardware manual

920-0029 Rev. C

5/2/2012

Mounting the Drive

You can mount your drive on the wide or the narrow side of the chassis using #6 screws. If possible, the

drive should be securely fastened to a smooth, at metal surface that will help conduct heat away from the

chassis. If this is not possible, then forced airow from a fan may be required to prevent the drive from

overheating.

• Never use your drive in a space where there is no air ﬂow or where other devices cause

the surrounding air to be more than 55°C.

• Never put the drive where it can get wet or where metal or other electrically conductive

particles can get on the circuitry.

• Always provide air ﬂow around the drive. When mounting multiple STAC6 drives near

each other, maintain at least one half inch of space between drives.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57

Brak uwag

Applied-motion STAC6-C Instrukcja Użytkownika Strona 52