Applied-motion SWM24IP-3EE Instrukcja Użytkownika Pobierz pdf (Strona 26)

Programmable Output

e SWM24SF and SWM24QF include four “ex I/O” points which can be individually congured to act as digital out-

puts. e SWM24Q, SWM24S and SWM24IP includes one dedicated digital output. Each output can be set to auto-

matically control a motor brake, to signal a fault condition, to indicate when the motor is moving or to provide an output

frequency proportional to motor speed (tach signal). An output can also be turned on and o by program instructions

like Set Output. An output can be used to drive LEDs, relays and the inputs of other electronic devices like PLCs and

counters. e “OUT+” (collector) and “OUT-” (emier) terminals of the transistor are available at the connector. is al-

lows you to congure the output for current sourcing or sinking.

Diagrams of various connection types follow.

Do not connect the output to more than 30VDC.

e current through the output terminal must not exceed 40ma.

Connecting a Sinking Output

Connecting a Sourcing Output

5-24 VDC

Power Supply

+ –

Load

SWM24

OUT+

OUT

5-24 VDC

Power Supply

+ –

Load

SWM24

OUT+

OUT

SWM24 Hardware Manual

920-0068B

10/31/2013

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Brak uwag

Applied-motion SWM24IP-3EE Instrukcja Użytkownika Strona 26